· 2017 유럽금형 전시회…
· 2017 금속 산업대전( …
· 2017 한국전자전(Kore…
· 2017 제22회 중국 국…
Home > 제품소개 > SCANNER > Galvo Scanner > Galvo Motor > 6260

6260
* Model 6260H Moving Magnet Closed Loop Galvanometer Based Optical Scanner
* The 6260H supports apertures of 30mm to greater than 75mm
* Highest Galvo Speeds and Step Response Times
* Maintaining Position Accuracy and Repeatability at High Speeds
* High System Performance and Reliability Over Time
* Laser Material Processing
* Biomedical Systems
* Laser Projection
* Imaging and Printing
* Semiconductor Processing
#1 : 6260H data sheet.pdf

Galvanometer Specifications

All Position Detector specifications apply with Cambridge Technology servo driver after a 30 second warm-up. All angles are in mechanical degree. Consult manual for complete operating instructions.

Mechanical Specifications

Rated Angular Excursion:   40°
Rotor Inertia:   47.5 gm cm2, +/-10%
Torque Constant:   8.5x105 dyne cm/amp, +/-10%
Maximum Coil Temperature:   110°C
Thermal Resistance (Coil to Case):   0.2°C/Watt, Max

Electrical Specifications/Drive Mechanism

Coil Resistance:   0.6 Ohms, +/-10%
Coil Inductance:   530µH, +/-10%
Back EMF Voltage:   1.48 mV/degree/sec, +/-10%
RMS Current:   12 Amperes at Tcase of 50°C, Max
Peak Current:   40 Amperes, Max
Small Angle Step Response Time:   700 µs, with 30mm Y mirror, settled to 99%

Position Detector

Linearity:   99.9 %, Minimum, over 20 degrees, 99.5% Typical, over 40 degrees
Scale Drift:   50 PPM/°C, Maximum
Zero Drift:   15 µrad/°C, aximum
Repeatability, Short Term:   8 microradians
Output Signal, Common Mode:   155 µA with AGC current of 30mA, +/-20%
Output Signal, Differential Mode:   11.7 µA/°, at common mode current of 155 µA, +/-20%



 
sales@mjlinc.com